Written by
| Powered by phpBay Pro |
What amp do i need to power 2 Kicker Solo-Baric L5 08S12L54?
here is the information on the subs.
12" Solo-Baric L5 Series Subwoofer
Power Handling:
Peak: 1200 watts
RMS: 600 watts
Titanium deposit impregnated cone woofer with rolled outer edge
Santoprene rubber surround
Stamped steel basket
Vented 360° back bracing
Rear foam gasket
Spring loaded terminals
Poly-cotton semi-progressive spider
Heat-dispersing, solid pole piece
Spiralead™ tinsel leads
High-temperature dual 4 ohm voice coils
Frequency response: 20-100 Hz
Sensitivity: 87 dB
Other search terms: S12L5, S12L54, 12L5, 12L54, 08S12L54
Authorized Internet Dealer
1-year Manufacturer's warranty
You're going to want to get either a mono-block amp or a 2-channel amp. Here's how to wire the mono-block amp: http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_4-ohm_mono.jpg
Here's how to wire the 2-channel amp: http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_4-ohm_2ch.jpg
Now, when you look for the rms rating and the ohm ratings, make sure you match them correctly (they're labeled in the diagrams I provided.) As far as the rms wattage, you can run up to 110% of the actual rms rating. So if your sub is rated at 600w rms each, you can actually give them 660w rms safely.
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
